Truck-Mounted Concrete pump

Truck-Mounted Concrete pump

CamelWay truck-mounted concrete pump has 62m vertical reach with the height limit programmed to prevent boom contact with an obstruction or overhead hazard.

After decades of design and engineering innovation, Truck mounted concrete pumps have become the most cost-effective and efficient choice for pouring and placing concrete. A replacement for having to manually mix and transfer materials on site, modern concrete pumping trucks eliminate labor requirements, speed up cycle times and deliver improved results. When you invest in truck mounted concrete pumps for residential or commercial use from CamelWay , you benefit from innovative solutions for maximizing productivity and efficiency.

CamelWay truck-mounted concrete pump has 62m vertical reach with the height limit programmed to prevent boom contact with an obstruction or overhead hazard. The 62m concrete pump provides the users reliable pumping performance along with the highly wear resistant parts including delivery pipe, discharge port, transition bushing, concrete piston, wear plate, cutting ring and delivery cylinder that improve the pumping efficiency and reduce down time.

truck mounted concrete pump

Advantages

  • One Button Stabilization Technology

  • Energy Saving Technology and Anti Overswing Technology

  • Fault Self Diagnostic Technology and Smart Boom System

  • Hydraulic Oil Level Monitoring and Safety Technology

  • Boom Overload Protection Technology and Hopper Screen Interlock Technology

  • Coordinated Section Operation

Working principle

The one button stabilization technology quickly dampens any boom movement resulting from repositioning the boom. This allows precise positioning of the end hose.The boom anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.With cycle times of up to 29 per minute (at 12MPa), pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%.

By adopting our new swing brake technology, the boom's overswing amplitude is reduced by 60%.Continually monitors more than 200 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%. One Button Boom Extend/Retract.Press upward on the boom extend/retract button to extend the boom or press downward to retract the boom automatically.The boom can be rapidly and accurately repositioned by coordinating the movement the first and second sections.Relief valves are mounted on the boom cylinder counterbalance valves. These valves will release pressure in the event of excessive boom load to prevent damage to the boom.

As an operator protection measure, the pump will automatically stop when the hopper screen is opened.The oil level in the hydraulic reservoir is continually monitored. If the level drops below a preset level, an alarm will sound and the pump will be stopped to prevent damage to the hydraulic system.

Technical Data

Vertical reach62 m
Horizontal reach44.4 m
Unfolding height13.70 m
End hose length4 m
Supporting equipmentXXT
THP pump units140H / 170H
Maximum flow rate*138 / 163 m³/h
Maximum concrete pressure**119 / 119 bar
Pump cycles*28 / 32 rpm

Request for Quotation

You can get the price list and a ZME representative will contact you within one business day.

Please fill in your name and your message and do not forget mail and/or phone if you like to be contacted. Please note that you do not need to have a mail programme to use this function.